Acer » Aspire » 7250 » Video Installation Guide

How to Remove, Replace, Install, Repair, or Fix your Acer Aspire 7250 Laptop LCD SCREEN Monitor

The tools you will need to replace or fix your Aspire 7250 laptop LCD screen is a Philips screw driver. We prefer to use a magnetic screwdriver because this will help is catching the screws when you remove them from your LCD hinges.

Prior to replacing your your Acer Aspire 7250 Laptop LCD SCREEN, make sure to remove the battery and disconnect the ac adapter from your laptop. You want to make sure no power is going to the laptop while your opening up the LCD panel for repair, or doing any kind of repair work on your laptop.

Step #1: Remove the rubber cover off your Acer Aspire 7250 laptop LCD screen. The rubber cover can be found on the front of the LCD panel (plastic Bezel). Rubber covers can also be found on the side of the laptop LCD plastic bezel. The screws on the side of your Acer Aspire 7250 laptop LCD hold the hinges in place.

Step #2: Once the rubber covers have been removed from your Acer Aspire 7250 LCD, take your Philips head screw driver and remove the screws from the LCD screen.

Step#3: Gently remove the plastic bezel from your Aspire monitor. Pull the plastic frame in an upward motion.

Step #4: Pry your 7250 LCD forward, and remove the screws from the side of the LCD hinges.

Step#5: Place your 7250 LCD downwards and remove the tape that is holding the LCD cable in place. Once the tape is removed, the cable may be disconnected from the monitor. Unplug the inverter cable from your 7250 LCD. Your Acer Aspire 7250 LCD has now been removed and is ready for replacement.

Step #6: We will now install the new Acer Aspire LCD onto your laptop. Plug the LCD cable back into your LCD. Secure the LCD cable connector with the tape on the cable. Reconnect your Acer Aspire LCD Inverter.

Step #7: Screw the Hinges back onto the Aspire 7250 LCD screen.

Step #8: Place the LCD Bezel back onto the screen.

Step #9: Snap the Aspire 7250 plastic bezel cover back in place.

Step #10: Screw the plastic bezel back onto the LCD monitor.

Step #11: Place the rubber covers over the screws.

Step #12: And that all. You just replaced your laptop Aspire 7250 LCD screen!

Acer Aspire 7250 LCD SCREEN DIAGNOSIS of problems. When should you attempt to replace the LCD?

The common reasons our customer purchase LCDs from us is to fix the following problems:

1. Acer 7250 LCD screen become too dark or dim.

2. Acer 7250 LCD monitor starts to flicker, and/or has image imperfections.

3. Acer 7250 laptop LCD is cracked, broken glass or has dead pixels.

If your Acer 7250 has any of these LCD issues, a new LCD may solve the problem. Feel free to contact us for any advice or help.