HP » EliteBook » 6930p » Video Installation Guide
How to Remove, Replace, Install, Repair, or Fix your HP EliteBook 6930p Laptop LCD SCREEN Monitor
The tools you will need to replace or fix your EliteBook 6930p laptop LCD screen is a Philips screw driver. We prefer to use a magnetic screwdriver because this will help is catching the screws when you remove them from your LCD hinges.
Prior to replacing your your HP EliteBook 6930p Laptop LCD SCREEN, make sure to remove the battery and disconnect the ac adapter from your laptop. You want to make sure no power is going to the laptop while your opening up the LCD panel for repair, or doing any kind of repair work on your laptop.
Step #1: Remove the rubber cover off your HP EliteBook 6930p laptop LCD screen. The rubber cover can be found on the front of the LCD panel (plastic Bezel). Rubber covers can also be found on the side of the laptop LCD plastic bezel. The screws on the side of your HP EliteBook 6930p laptop LCD hold the hinges in place.
Step #2: Once the rubber covers have been removed from your HP EliteBook 6930p LCD, take your Philips head screw driver and remove the screws from the LCD screen.
Step#3: Gently remove the plastic bezel from your EliteBook monitor. Pull the plastic frame in an upward motion.
Step #4: Pry your 6930p LCD forward, and remove the screws from the side of the LCD hinges.
Step#5: Place your 6930p LCD downwards and remove the tape that is holding the LCD cable in place. Once the tape is removed, the cable may be disconnected from the monitor. Unplug the inverter cable from your 6930p LCD. Your HP EliteBook 6930p LCD has now been removed and is ready for replacement.
Step #6: We will now install the new HP EliteBook LCD onto your laptop. Plug the LCD cable back into your LCD. Secure the LCD cable connector with the tape on the cable. Reconnect your HP EliteBook LCD Inverter.
Step #7: Screw the Hinges back onto the EliteBook 6930p LCD screen.
Step #8: Place the LCD Bezel back onto the screen.
Step #9: Snap the EliteBook 6930p plastic bezel cover back in place.
Step #10: Screw the plastic bezel back onto the LCD monitor.
Step #11: Place the rubber covers over the screws.
Step #12: And that all. You just replaced your laptop EliteBook 6930p LCD screen!
HP EliteBook 6930p LCD SCREEN DIAGNOSIS of problems. When should you attempt to replace the LCD?
The common reasons our customer purchase LCDs from us is to fix the following problems:
1. HP 6930p LCD screen become too dark or dim.
2. HP 6930p LCD monitor starts to flicker, and/or has image imperfections.
3. HP 6930p laptop LCD is cracked, broken glass or has dead pixels.
If your HP 6930p has any of these LCD issues, a new LCD may solve the problem. Feel free to contact us for any advice or help.