Toshiba » Satellite » T135 » Video Installation Guide
How to Remove, Replace, Install, Repair, or Fix your Toshiba Satellite T135 Laptop LCD SCREEN Monitor
The tools you will need to replace or fix your Satellite T135 laptop LCD screen is a Philips screw driver. We prefer to use a magnetic screwdriver because this will help is catching the screws when you remove them from your LCD hinges.
Prior to replacing your your Toshiba Satellite T135 Laptop LCD SCREEN, make sure to remove the battery and disconnect the ac adapter from your laptop. You want to make sure no power is going to the laptop while your opening up the LCD panel for repair, or doing any kind of repair work on your laptop.
Step #1: Remove the rubber cover off your Toshiba Satellite T135 laptop LCD screen. The rubber cover can be found on the front of the LCD panel (plastic Bezel). Rubber covers can also be found on the side of the laptop LCD plastic bezel. The screws on the side of your Toshiba Satellite T135 laptop LCD hold the hinges in place.
Step #2: Once the rubber covers have been removed from your Toshiba Satellite T135 LCD, take your Philips head screw driver and remove the screws from the LCD screen.
Step#3: Gently remove the plastic bezel from your Satellite monitor. Pull the plastic frame in an upward motion.
Step #4: Pry your T135 LCD forward, and remove the screws from the side of the LCD hinges.
Step#5: Place your T135 LCD downwards and remove the tape that is holding the LCD cable in place. Once the tape is removed, the cable may be disconnected from the monitor. Unplug the inverter cable from your T135 LCD. Your Toshiba Satellite T135 LCD has now been removed and is ready for replacement.
Step #6: We will now install the new Toshiba Satellite LCD onto your laptop. Plug the LCD cable back into your LCD. Secure the LCD cable connector with the tape on the cable. Reconnect your Toshiba Satellite LCD Inverter.
Step #7: Screw the Hinges back onto the Satellite T135 LCD screen.
Step #8: Place the LCD Bezel back onto the screen.
Step #9: Snap the Satellite T135 plastic bezel cover back in place.
Step #10: Screw the plastic bezel back onto the LCD monitor.
Step #11: Place the rubber covers over the screws.
Step #12: And that all. You just replaced your laptop Satellite T135 LCD screen!
Toshiba Satellite T135 LCD SCREEN DIAGNOSIS of problems. When should you attempt to replace the LCD?
The common reasons our customer purchase LCDs from us is to fix the following problems:
1. Toshiba T135 LCD screen become too dark or dim.
2. Toshiba T135 LCD monitor starts to flicker, and/or has image imperfections.
3. Toshiba T135 laptop LCD is cracked, broken glass or has dead pixels.
If your Toshiba T135 has any of these LCD issues, a new LCD may solve the problem. Feel free to contact us for any advice or help.